ABB Placement Interview questions with answers and careers:
1.For the same current carrying capacity corona loss of ACSR will be ________than the copper conductor.
(a) more
(b) less
(c) equal.
Ans: (b)
2. Improvement in power factor reduces
(a) power consumed by consumer
(b) power generation
(c) both a & b
3.Formulae of Regulation (Vs- Vr)* 100/ Vr, then transmission line is
(a) short transmission line
(b) long
(c) medium
4.In the formulae E = 4.44 f N ?, ? is
(a) Avg value
(b) Rms value
(c) Maximum value
5.In which motor no-load to full-load diff. is lowest
(a) series motor
(b) shunt motor
(c) Compound motor
Ans: (b)
6.A sync. Motor is running at synch. Speed, if al of sudden D.C. excitation is removed, then
(a) it will rotate at slip speed
(b) it will stop
(c) it will continue to rotate at sync. Speed
7.Increased rotor resistance in rotor ckt of induction motor is related with
(a) high starting torque
(b) more speed variation
Ans: (a)
8.In the formulae E = 4.44 f N ?, ? is
(a) Avg value
(b) Rms value
(c) Maximum value
Ans: (a)
9.f(x) = Sin x + Cos x, find the maximum value of the function
10.What is GDP ?
11. B-R-Y sequence is followed in three phase system, if phase voltage in B-phase is Vm sin 100, then the phase voltage in R-phase would be (a) Vm sin (-20)
Ans: (a)
12.Insulation used in transformer ___________leakage flux.
(a) increases
(b) decreases
Ans: (b)
13.Megger is used for the measurement of (a) Insulation resistance, (b) Conductor resistance
Ans: (a)
14.In the formulae E = 4.44 f N ?, ? is
(a) Avg value, (b) Rms value, (c) Maximum value
Ans: (a)
15.In which motor no-load to full-load diff. is lowest
(a) series motor, (b) shunt motor, (c) Compound motor
Ans: (b)
16.why we don,t like flashover in transmission line (t-line)-
(a ) it may create earth fault(b )it reduces the life of insulator
17..After rain what happens to Insulator (a) break-down strength of Insulator decreases, (b)Arch length reduces,
Ans: (b)
18.B-R-Y sequence is followed in three phase system, if phase voltage in B-phase is Vm sin 100, then the phase voltage in R-phase would be (a) Vm sin (-20)
Ans: (a)
19. A sync. Motor is running at synch. Speed, if al of sudden D.C. excitation is removed, then
(a) it will rotate at slip speed
(b) it will stop
(c) it will continue to rotate at sync. Speed
20.What would be the output of the following program.
main()
{
int i=7;
printf(“%d
“,i++*i++);
}
(a) 49
(b) 56
(c) 72
(d) compilation error
21.What would be the output of the following program.
main()
{
struct emp
{
char name[20];
int age;
float sal;
};
struct emp e = {“tiger”};
printf(”
%d %f”,e.age,e.sal);
}
(a) 0 0.000000
(b) Garbage values
(c) Error
(d) none of the above
22.pointout the error, if any, in the for loop
main()
{
int l=1;
for(;;)
{
printf(“%d”,l++);
if(l>10)
break;
}
}
(a) The condition in the for loop is a must
(b) The two semicolons should be dropped
(c) The for loop should be replaced by awhile loop
(c) The for loop should be replaced by awhile loop
(d) No error
23.What would be the output of the following program.
#define CUBE(x) (x*x*x)
main()
{
int a,b=3;
a=CUBE(b++);
printf(”
%d %d”,a,b);
}
(a) 64 4
(b) 27 4
(c) 27 6
(d) 64 6
24.What would be the output of the following program.
#include
main()
{
extern int a;
printf(“%d”,a);;
}
int a=20;
(a) 20
(b) 0
(c) garbage value
(d) error!!
25.What would be the output of the following program.
main()
{
int a[5]={2,3};
printf(”
%d %d %d”,a[2],a[3],a[4]);
}
(a) garbage value
(b) 2 3 3
(c) 3 2 2
(d) 0 0 0
Careers at ABB:
http://new.abb.com/careers
http://new.abb.com/careers
You can search job across world:
http://new.abb.com/careers/job-search
Contact Address:
Ahmedabad:
ABB Ahmedabad office,
A/6 Corporate Road Safal Profitaire
Bangalore:
KSSIDC IT/BT park
Rajajinagar Industrial Estate
+91 80 2294 6155
Bangalore:
Regional Office South 1 – Bangalore
49 Race Course Road
+91 80 2294 9250
Chennai :
Global Operations Center, Chennai
Mount Towers
+91 44 6615 6000
Official Website:http://www.abb.com
We appreciate your comment! You can either ask a question or review our blog. Thanks!!